MV Forged SIGNATURE SERIES VL62 1-Piece Wheel

MV Forged SIGNATURE SERIES VL62 1-Piece Wheel

The VL62 Monoblock is the structural apex of the Signature Series, and the most uncompromising wheel MV Forged produces for Bentley, Rolls-Royce, Porsche, and comparable luxury and exotic applications. Forged from a single billet of 6061-T6 aluminum, one of the most specified alloys in aerospace and motorsport applications for its combination of tensile strength, fatigue resistance, and machinability, the VL62 Monoblock achieves what no multi-piece wheel can replicate by design. The hub, spokes, and barrel are machined from a continuous grain structure, eliminating the hardware interfaces, sealants, and potential flex points inherent to two and three-piece assemblies entirely. What remains is a wheel with uniform load distribution across its complete cross-section and no mechanical joints to inspect, maintain, or replace over the life of the wheel.

The structural advantage of monoblock forging is compounded by the VL62's back pocketing process. After the initial forge, CNC machining removes material from non-structural spoke sections, achieving mass reduction that the forging process alone cannot deliver without compromising spoke geometry or load-bearing cross-sectional integrity. The result is a wheel that carries no excess mass at any point in its structure. At the unsprung level, that reduction translates directly into suspension compliance over road surfaces, braking consistency under repeated load cycles, and steering response where rotational inertia is a measurable variable. On a Bentley or Rolls-Royce platform where ride quality and refinement are primary engineering benchmarks, and on a Porsche where chassis dynamics are developed to a high-performance standard, unsprung mass reduction contributes meaningfully to the behavior the vehicle was designed to deliver.

Diameter, width, offset, and finish are fully configurable at the time of order. Each wheel is machined to the confirmed specification, not adapted from an existing size in inventory. For Bentley, Rolls-Royce, Porsche, and comparable platforms where standard sizing consistently falls short of actual fitment requirements, that distinction matters in both dimensional accuracy and long-term structural performance. The monoblock construction ensures specified dimensions are held within the tightest possible tolerances at the mounting interface, where accuracy under load is most consequential.

The VL62 geometry produces depth and a defined profile from every viewing angle, a design language developed to complement the proportions and aesthetic standards of luxury and exotic platforms without visual excess or decorative compromise. The restraint of the design reflects the standard of the vehicles it is built for. On a Bentley Continental or a Rolls-Royce Ghost, a wheel communicates quality through execution and proportion, not embellishment. The VL62 Monoblock is designed with that understanding.

For owners who regard structural integrity and long-term reliability as the primary criteria in wheel selection, and for whom the adjustability of a multi-piece design is secondary to the performance and durability of a continuous grain structure, the VL62 Monoblock is the definitive specification within the Signature Series.

Details:

• Lightweight construction designed to reduce overall vehicle weight and improve performance
• Manufactured from aerospace grade 6061 T6 forged aluminum for durability and long-term reliability
• Precision engineered for exact vehicle specific fitment to ensure proper installation and function
• Wide range of finish options available to suit different styles and builds
• Machined pocketing reduces weight, which improves handling, braking response, and acceleration
• Diameters: 19″ | 20″ | 21″ | 22″ | 23″ | 24″ | 26″
• Widths: 8″ | 8.5″ | 9″ | 9.5″ | 10″ | 10.5″ | 11″ | 11.5″ | 12″ | 12.5″ | 13″

Wheel Finish Options:

MV Forged finishes are developed to highlight the design, depth, and precision of each wheel. Every finish goes through a detailed process that focuses on material quality, surface preparation, and layered coating techniques to achieve a refined final result.

• Standard color finishes are offered in gloss, satin, or textured clear coat options. Each finish is designed to give you flexibility in customizing the overall look while maintaining durability for both street and performance applications.

• Transparent color options are available for an additional cost and provide a custom finish for your build. These finishes can be ordered in either gloss or satin, depending on your preferred look. Each option is applied over a base such as brushed metal and high-luster polish allowing you to tailor the final appearance to match your vehicle’s style.

All finishes are produced using carefully sourced materials selected from global suppliers. This approach ensures consistency in color, durability, and overall quality across every set of wheels.

Key features of MV Forged finishes:

• Brushed or polished base surfaces for visual depth
• Transparent powder coat options that reveal metal texture
• Multi-stage finishing process for enhanced detail and clarity
• Gloss, satin, and textured solid color options available
• High-quality materials sourced globally for consistent results
• Designed to complement custom builds, exotic vehicles, and performance applications

This finishing process allows each wheel to stand out under different lighting conditions while maintaining long-term durability, making it ideal for both show builds and daily-driven high-end vehicles.

Logo Color Fill Options:

MV Forged also offers a wide range of logo options and color fills. You can choose from multiple colors for branding elements, lettering, and accents to match your vehicle or overall build theme. This adds another level of personalization without changing the wheel finish itself.

• Upgrade your wheel with logo, text, and groove color fill options. Choose any MV Forged color including, Black, Graphite, Chalk Grey, White, Gold, Orange, Pink, Pastel Pink, Purple, Blue, Tiffany, Blue, Miami Blue, Rally Yellow, Acid Green, Neon Yellow or Red to match your build.
• This option adds a custom detail that stands out on the street and at shows. Ideal for drivers who want a personalized finish that complements their vehicle’s color scheme and overall design.

Center Cap Options:

MV Forged center caps are designed to add detail, contrast, and personalization to each wheel setup. Every cap is built with the same focus on material quality and finish consistency as the wheels themselves, giving you a cohesive and refined final look. All MV Forged offers their four-piece or floater center caps. The four-piece center cap design provides a clean base while allowing customization through different logo styles and color combinations, including advanced multi-piece designs that introduce additional depth and hardware accents.

• Multi-piece cap configurations expand customization further. These designs incorporate exposed titanium hardware and layered construction, giving the center cap a more technical and motorsport-inspired appearance. Hardware finishes are available in black, silver, gold, and burnt titanium, allowing you to match or contrast with your wheel setup.

Premium Options:

• Floater Caps + Lug Covers Detail:
  Large floating center caps designed to cover lug hole openings for a seamless wheel face. Ideal for custom builds that require a premium floating cap setup with full lug coverage.
• Floater Cap Lug Covers Only:
  Designed for vehicles equipped with OEM floating center caps, this option includes only the lug covers needed to complete the look. Common fitment includes Rolls-Royce models and similar applications.
• OEM (Ferrari, Lambo, Benz, Porsche, Ect) Cap Detail:
  Retain your factory center caps with precision-machined wheel fitment. Compatible with OEM caps from Ferrari, Lamborghini, Mercedes-Benz, and Porsche for a direct and secure installation.
• Logo Text Fill:
  Customize the engraved wheel logos with color-matched text fill. This option allows you to match accents, brake calipers, or exterior color themes for a cohesive finish.
• 4PC Cap Upgrade:
  Upgrade from the standard center cap to a four-piece design featuring a carbon fiber insert, MV Forged logo insert and a customizable outer ring. Secured with titanium hardware in either black, silver, gold, or burnt titanium for a premium finish and long-term durability.

Premium 4PC Carbon Fiber Center Cap:

About MV Forged:

Every set of MV Forged wheels is designed, engineered, and manufactured in-house at their Southern California facility. This hands-on process gives MV Forged full control over production, materials, and final fitment. With more than 70 years of combined forged wheel experience, the team focuses on consistent quality, precise tolerances, and reliable performance for high-end builds.

Each wheel is developed using advanced Finite Element Analysis testing. This method allows engineers to evaluate stress points, optimize weight distribution, and maintain long-term durability. The result is a forged wheel that delivers reduced rotational mass, improved responsiveness, and dependable strength for both daily driving and high-performance applications.

MV Forged wheels are built for exotic, luxury, and performance vehicles. They are engineered to meet the expectations of drivers who demand proper fitment, durability, and refined design in every detail.

Note:

• Wheels are all sold individually
• Some media may show the 3-Piece variation
• Some bolt patterns may require slight adjustments to the spoke design to properly accommodate additional lug pocketing and ensure precise fitment.
• MV Forged wheels are built to order to match your exact vehicle fitment and finish preferences. After you place your order, a wheel specialist from our team will contact you to confirm sizing, offsets, and color options before production begins. This process helps ensure proper fitment for your specific application and avoids any issues during installation.