MV Forged PRO SPEC SERIES PS-1V1 1-Piece Wheel

MV Forged PRO SPEC SERIES PS-1V1 1-Piece Wheel

The PS-1V1 Monoblock is the definitive expression of the Pro Spec collection, combining the front undercutting technique and integrated brake cooling architecture of the PS-1V1 with the structural advantages that only monoblock forging can deliver. Forged from a single billet of 6061-T6 aluminum, one of the most specified alloys in aerospace and motorsport applications for its combination of tensile strength, fatigue resistance, and machinability, the PS-1V1 Monoblock achieves what no multi-piece wheel can replicate by design. The hub, spokes, and barrel are machined from a continuous grain structure, eliminating the hardware interfaces, sealants, and potential flex points inherent to two and three-piece assemblies entirely. What remains is a wheel with uniform load distribution across its complete cross-section and no mechanical joints to inspect, maintain, or replace over the life of the wheel.

The front undercutting technique removes material from the spoke face through a precision machining process that conventional wheel construction cannot access without compromising structural geometry. Combined with the monoblock's continuous grain structure, the undercutting delivers a spoke profile that is simultaneously the lightest and most structurally coherent configuration available in the PS-1V1 range. The motorsport aesthetic that results from the undercutting process is a direct consequence of the engineering, not a stylistic addition to it.

The aerodynamic and brake cooling function is built into the rear of the wheel center. Functional brake cooling pockets machined into the back side of the center work in conjunction with the wheel's rotational movement, accelerating air through window channels in the spoke structure and expelling it through external orifices in the assembly. Brake cooling improves through increased directed airflow at the caliper and rotor. Downforce contribution increases. Underbody pressure is reduced. On a monoblock wheel where the spoke geometry, cooling pocket placement, and barrel form a single continuous structure, the precision of those pocket locations and channel geometries is held to a tighter tolerance than any assembled alternative can achieve. The aerodynamic function performs exactly as machined, without the positional variation that hardware assembly introduces.

Diameter, width, offset, and finish are fully configurable at the time of order. Each wheel is machined to the confirmed specification, not adapted from an existing size in inventory. For exotic, widebody, and performance platforms where standard sizing rarely reflects actual fitment requirements, that distinction matters in both dimensional accuracy and long-term structural performance. The monoblock construction ensures specified dimensions are maintained at the mounting interface under load without the mechanical variables that multi-piece assemblies introduce over time. The PS-1V1 spoke geometry produces depth and a defined profile from every viewing angle, a design language consistent with the proportions and aesthetic standards of Ferrari, Lamborghini, McLaren, Porsche, and comparable platforms without visual excess. It presents the same visual authority on an aggressive street build as it does on a circuit configuration and performs to the same standard in both contexts.

For owners who regard structural integrity, aerodynamic function, and long-term reliability as the primary criteria in wheel selection, and for whom the adjustability of a multi-piece design is secondary to the performance of a continuous grain structure, the PS-1V1 Monoblock is the cleaner engineering solution and the apex of what the Pro Spec collection offers.

Wheel Finish Options:

• Standard color finishes are offered in gloss, satin, or textured clear coat options for the wheel center, outer barrel, and inner barrel. Each finish is designed to give you flexibility in customizing the overall look while maintaining durability for both street and performance applications.

• Transparent color options are available for an additional cost and provide a custom finish for your build. These finishes can be ordered in either gloss or satin, depending on your preferred look. Each option is applied over a base such as brushed metal, high-luster polish, or stone, allowing you to tailor the final appearance to match your vehicle’s style.

Details:

• Lightweight construction designed to reduce overall vehicle weight and improve performance
• Manufactured from aerospace grade 6061 T6 forged aluminum for durability and long-term reliability
• Precision engineered for exact vehicle specific fitment to ensure proper installation and function
• Modular width options allow for a tailored stance and fitment setup
• Wide range of finish options available to suit different styles and builds
• Machined pocketing reduces weight, which improves handling, braking response, and acceleration
• Optional centerlock configuration for a motorsport inspired setup
• Diameters: 19″ | 20″ | 21″ | 22″ | 23″ | 24″ | 26″
• Widths: 8″ | 8.5″ | 9″ | 9.5″ | 10″ | 10.5″ | 11″ | 11.5″ | 12″ | 12.5″ | 13″

Premium Options:

• Floater Caps + Lug Covers Detail:
  Large floating center caps designed to cover lug hole openings for a seamless wheel face. Ideal for custom builds that require a premium floating cap setup with full lug coverage.
• Floater Cap Lug Covers Only:
  Designed for vehicles equipped with OEM floating center caps, this option includes only the lug covers needed to complete the look. Common fitment includes Rolls-Royce models and similar applications.
• OEM (Ferrari, Lambo, Benz, Porsche, Ect) Cap Detail:
  Retain your factory center caps with precision-machined wheel fitment. Compatible with OEM caps from Ferrari, Lamborghini, Mercedes-Benz, and Porsche for a direct and secure installation.
• Center Lock Application:
  Built for vehicles with center lock systems. Each wheel is machined to ensure proper fitment with the OEM center lock hub and nut for accurate installation and performance.
• Logo Text Fill:
  Customize the engraved wheel logos with color-matched text fill. This option allows you to match accents, brake calipers, or exterior color themes for a cohesive finish.
• MCL Center Lock Style Caps w/Lug Plate:
  Get the center lock appearance without converting your vehicle. Designed for standard lug setups, this option delivers the visual style of a center lock wheel while maintaining factory mounting points.
• 4PC Cap Upgrade:
  Upgrade from the standard center cap to a three-piece design featuring a carbon fiber insert and a customizable outer ring. Secured with titanium hardware for a premium finish and long-term durability.

Logo Color Fill Options:

MV Forged also offers a wide range of logo options and color fills. You can choose from multiple colors for branding elements, lettering, and accents to match your vehicle or overall build theme. This adds another level of personalization without changing the wheel finish itself.

• Upgrade your wheel with logo, text, and groove color fill options. Choose any MV Forged color including, Black, Graphite, Chalk Grey, White, Gold, Orange, Pink, Pastel Pink, Purple, Blue, Tiffany, Blue, Miami Blue, Rally Yellow, Acid Green, Neon Yellow or Red to match your build.
• This option adds a custom detail that stands out on the street and at shows. Ideal for drivers who want a personalized finish that complements their vehicle’s color scheme and overall design.

Center Cap Options:

MV Forged center caps are designed to add detail, contrast, and personalization to each wheel setup. Every cap is built with the same focus on material quality and finish consistency as the wheels themselves, giving you a cohesive and refined final look. All MV Forged wheels come standard with a two-piece center cap. This design provides a clean base while allowing customization through different logo styles and color combinations. For customers looking for a more detailed appearance, upgraded cap options are available, including advanced multi-piece designs that introduce additional depth and hardware accents.

• Premium cap upgrades include carbon fiber options in both 2x2 twill and forged carbon constructions. The carbon structure allows light to reflect differently across the surface, creating a more dynamic visual compared to standard finishes.
• Multi-piece cap configurations expand customization further. These designs incorporate exposed titanium hardware and layered construction, giving the center cap a more technical and motorsport-inspired appearance. Hardware finishes are available in black, silver, gold, and burnt titanium, allowing you to match or contrast with your wheel setup.

Standard 2PC Carbon Fiber Center Caps:

Premium 4PC Carbon Fiber Center Cap:

About MV Forged:

Every set of MV Forged wheels are designed, engineered, and manufactured in-house at their Southern California facility. This hands-on process gives MV Forged full control over production, materials, and final fitment. With more than 70 years of combined forged wheel experience, the team focuses on consistent quality, precise tolerances, and reliable performance for high-end builds.

Each wheel is developed using advanced Finite Element Analysis testing. This method allows engineers to evaluate stress points, optimize weight distribution, and maintain long-term durability. The result is a forged wheel that delivers reduced rotational mass, improved responsiveness, and dependable strength for both daily driving and high-performance applications.

MV Forged wheels are built for exotic, luxury, and performance vehicles. They are engineered to meet the expectations of drivers who demand proper fitment, durability, and refined design in every detail.

Note:

• Wheels are all sold individually
• Some bolt patterns may require slight adjustments to the spoke design to properly accommodate additional lug pocketing and ensure precise fitment.
• MV Forged wheels are built to order to match your exact vehicle fitment and finish preferences. After you place your order, a wheel specialist from our team will contact you to confirm sizing, offsets, and color options before production begins. This process helps ensure proper fitment for your specific application and avoids any issues during installation.